Resmed Airfit P10 Nasal Pillows Mask is exceptionally quiet and lightweight with dual-wall nasal pillows that adapt naturally to movement during sleep to maintain a secure fit. AirFit P10’s QuickFit auto-adjusting headgear, in gray with blue highlights, provides gentle stability with minimal facial contact; and this FitPack includes 3 cushion sizes — Small, Medium & Large — so you can find your best size right out of the box.
EXCEPTIONALLY QUIET
AirFit P10’s QuietAir woven-mesh venting eliminates the traditional “exhalation holes” found in most masks. With QuietAir woven-mesh air is gently and noiselessly dispersed away from you and your bed partner. In fact, the AirFit P10 is about 50% quieter than ResMed’s previous nasal pillow masks at just 21.4 dBA.
DUAL-WALL NASAL PILLOWS
The AirFit P10’s Nasal Pillows feature a soft outer wall for comfort and a secure inner wall for support. AirFit P10 nasal pillows rest on an integrated air chamber, with trampoline action, that adapts to your natural movements during sleep providing a soft, and secure seal even for the most active sleepers.
QUICK FIT AUTO-ADJUSTING HEADGEAR
AirFit P10’s unique QuickFit headgear, with a split-strap design, slips on and off easily and adjusts simply to your perfect fit. For looser headgear spread the back straps apart; and for tighter headgear bring them together. Use the included inline headgear clip for fine adjustments. P10’s warp-knitted nylon straps — in gray with blue highlights — are unobtrusive and elasticated gently stabilizing the mask and pulling the pillows softly into place.
INTEGRATED FLEXI-TUBE
The AirFit P10 includes an integrated, lightweight flexible short tube that extends off of the mask frame — stretching and bending to increase flexibility while maintaining seal and stability. It is designed to accommodate a wide range of sleeping positions comfortably without mask drag or catching.
REMARKABLY LIGHTWEIGHT, MINIMALIST DESIGN
Made up of just three parts — nasal pillows, headgear, and mask frame with integrated short tube — the AirFit P10 is about 50% lighter than previous ResMed nasal pillow masks. The minimalist design requires very little facial contact, no forehead support, and no hard parts that touch the face. AirFit provides a clear field of vision and an open feeling when in use so it is easy to sleep with; in fact in clinical studies, participants slept on average 42 minutes longer with the AirFit P10 compared to ResMed’s Swift FX.
How do I clean my Resmed P10 Nasal Pillow mask and how often should I clean it?
You should clean the cushion and frame with a short tube daily. The headgear only requires weekly cleaning. Facial oil and dirt can easily build up on your mask parts when they’re not cleaned properly, which can lead to skin irritation. The good news? Cleaning your mask doesn’t take long, so working it into your morning routine should be a breeze.
HOW TO CLEAN YOUR HEADGEAR:
The time it takes: 5 minutes
Supplies you’ll need to clean your headgear:
- Sink or tub
- Warm, drinking-quality water (86°F / 30°C)
- Mild or hypoallergenic soap, or baby shampoo
- Towel
Step-by-step cleaning tips:
-
- Unplug your CPAP machine from the power source and disconnect your mask/tubing from your machine.
- Disassemble your mask:
a. Holding the top of the mask tubing, squeeze and pull the pillows away from the mask frame.
b. Remove the headgear from the stabilizers by holding the fabric end of each strap and pulling it out to reveal the buttonhole, then sliding over the node and off the end of each stabilizer.
- In the sink, clean your mask parts by gently rubbing (or using a soft-bristle brush) with warm, drinking-quality water and soap. Avoid harsh cleaning products and dish detergents.
- Rinse again thoroughly with warm, drinking-quality water.
- Place mask components on the towel and allow them to air-dry away from direct sunlight.
Country Of Origin- Australia
Sizes- All Size Cushions in One Box
Reviews
There are no reviews yet.