Resmed AirCurve 10 VAuto is an auto-adjusting bilevel machine that uses the comfort of both the AutoSet algorithm and Easy-Breathe waveform in its VAuto algorithm to treat obstructive sleep apnea patients who can benefit from greater pressure support. The AirCurve 10 VAuto adjusts the baseline pressure to hold the airway open while maintaining fixed pressure support.
Compatible with up to 15 L/min of supplemental oxygen in S and CPAP mode and 4 L/min in VAuto mode.
Resmed AirCurve 10 VAuto Key features
Technical Specification
| Brand | ResMed |
| Model | AirCurve 10 Vauto |
| Usage/Application | Hospitals & Personal Use |
| Pressure Range (cm H2O) | S, VAuto: 2 to 25 cm H2O (2 to 25 hPa); CPAP: 4 to 20 cm H2O (4 to 20 hPa) |
| Ramp Rate (mins) | 5 to 45 minutes |
Additional Details
| Pressure Sensor | Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) |
| Power Supply Unit | 90 W, AC input range:100–240 V, 50–60 Hz 1.0–1.5 A, Class II 115 V, 400 Hz 1.5 A, Class II (nominal for aircraft use); DC output:24 V 3.75 A |
| Flow Sensor | Internally located at device inlet, digital mass flow type, -70 to +180 L/min |
General System
| Weight With Humidifier | 1248 gm |
| Dimensions | 205 x 150 x 116 mm (without humidifier), 255 x 150 x 116 gm (with humidifier) |
| Warranty | 2 Years |
Comfort Features
| Operating Temperature | +5°C to +35°C Note: The airflow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme ambient temperature conditions (40°C) the device remains safe. |
| Operating Altitude | Sea level to 2591 m; air pressure range 1013 hPa to 738 hPa |
Sound
| Pressure Level Measured | According to EN ISO 17510-1:2009 (CPAP mode); SlimLine: 26.6 dBA with uncertainty of 2 dBA, Standard: 26.6 dBA with uncertainty of 2 dBA |
| Power Level Measured | According to EN ISO 17510-1:2009 (CPAP mode); SlimLine: 34.6 dBA with uncertainty of 2 dBA, Standard: 34.6 dBA with uncertainty of 2 dBA |
Additional Details
| Operating Mode | S, VAuto, CPAP |
| Housing Construction | Flame retardant engineering thermoplastic |
| Supplemental Oxygen | Maximum flow: 15 L/min (CPAP, S); 4 L/min (VAuto) |
| Standard Air Filter | Material: Polyester non-woven fibre, Average arrestance: >75% for -7 micron dust |
| Hypoallergenic Air Filter | Material: Acrylic and polypropylene fibres in a polypropylene carrier, Efficiency: >98% for:- 7-8 micron dust; >80% for:- 0.5 micron dust |
| Air Outlet | 22 mm |
| Water Capacity | To maximum fill line 380 mL |
| Typical Power Consumption | 53 W (57 VA) |
| Peak Power Consumption | 104 W (108 VA) |
| Maximum Single Fault Steady Pressure | The device will shut down in the presence of a single fault if the steady state pressure exceeds:30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec |
| Wireless Module | Technology used:4G, 2G. It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks, tubes or accessories. Technology may not be available in all regions |
Additional Details
| Design Life | Device, power supply unit – 5 years / Cleanable humidifier – 2.5 years / Air tubing – 6 months |
| Operating Humidity | 10 – 95% relative humidity, non-condensing |
| Storage and Transport Temperature | -20°C to +60°C |
| Storage and Transport Humidity | 5 – 95% relative humidity, non-condensing |
In The Box:
- Resmed AirCurve 10 VAuto Device with HumidAir integrated humidifier
- Water tub
- ClimateLineAir™ Heated Tube
- Power supply unit
- Travel bag
- SD card (already inserted)
Warranty – 3 Years
Country of Origin -Australia
Frequently Asked Questions (FAQ’s)
Q: What Is the Price of a Resmed Auto Bipap Machine?
A: Resmed Bipap Auto Machine price Ranges from ₹ 65000 to ₹ 68000 Depending upon the Accessories Supplied with the Product.
Q: What Is the Model Name of the Resmed Bipap Auto Machine?
A: Resmed Bipap Auto Device By Resmed Aircurve 10vAuto. Manufactured in Australia.
Q: What is the Price of Resmed Aircurve 10v Auto Bipap Machine?
A: The price of Resmed Aircurve 10vAuto Ranges from ₹ 65000- ₹ 6900, Depending upon the model and accessories provided with the product.
Q: What Is the Difference between Bipap and Bipap Auto?
A: There are two types of Bipap Machines one Is Fixed pressure bipap and one is Auto Bipap Machines, In fixed pressure bipap physician has to prescribe the Exact IPAP and EPAP pressure. but in Auto Bipap Machines a range For IPAP has to be prescribed in relation to EPAP and Pressure Support. Both Devices have specific applications, please refer to the Physician to know what will suit the user.
Q: What are the operating Modes in Resmed Aircurve Auto Bipap Machine?
A: Resmed Aircruve 10vAuto has three Operational modes CPAP, S, and Vauto. Please refer to your physician for the exact mode of operation to be used by the patient.
Q: What are the accessories supplied with Resmed Aircurve 10vAuto?
A: Original Resmed Aircurve 10vAuto package contains Device, Humidifier Chamber, Power Adaptor, carry case, and SD Card Installed. The mask is an additional Accessory with this product.
Q: Where you can buy Resmed Bipap Machine & accessories?
A: Resmed Bipap Machine is Medical Equipment and should be bought from an Authorized Supplier, Resmed devices and accessories can be bought online at Megamed.in.
Reviews
There are no reviews yet.